Cruise Control & Driver Assistance
Diagnosis System (side Radar Lh)
In this manual: Cruise Control & Driver Assistance
~2min read
DESCRIPTION
CONSULT performs the following functions by communicating with the side radar LH.
| Select diag mode | Function |
|---|---|
| Self Diagnostic Result | Displays memorized DTC in the side radar. |
| Data Monitor | Displays real-time data of side radar. |
| Active Test | Enables operation check of electrical loads by sending driving signal to them. |
| ECU Identification | Displays part number of side radar. |
SELF DIAGNOSTIC RESULT
Self Diagnostic Result
Displays memorized DTC in side radar LH. Refer to DTC Index.
FFD (Freeze Frame Data)
The side radar records the following data when the malfunction is detected.
| Freeze Frame Data item | Description |
|---|---|
| VHCL SP from ADAS | The Nissan Murano vehicle speed (from ADAS control unit) at the moment a malfunction is detected is displayed |
| TURN SIG STATUS | Turn signal status at the moment a malfunction is detected is displayed |
DATA MONITOR
Monitored item [Unit] | Description |
|---|---|
BSW/CTA WARN STATUS [On/Off] |
Indicates [ON/OFF] status of Nissan Murano vehicle detection |
CTA SYSTEM ON [On/Off] |
Indicates [ON/OFF] status of Rear Cross Traffic Alert system |
BSW STATUS [On/Off] |
Indicates [ON/OFF] status of Blind Spot Warning system |
VHCL SPD SE [km/h] |
Indicates Nissan Murano vehicle speed [km/h] |
TURN SIGNAL [LH/RH/Off] |
Indicates the [LH/RH/OFF] operation of the signal |
SHIFT POSITION [P/R/N/D] |
Indicates position of transmission range switch |
LUMINANCE (LEFT) [Hi/Lo] |
Indicates the left side luminance level of the radar |
LUMINANCE (RIGHT) [Hi/Lo] |
Indicates the right side luminance level of the radar |
ACTIVE TEST
| Active test item | Operation | Description |
|---|---|---|
| BSW/BSI INDICATOR DRIVE | On | Outputs the voltage to illuminate the Blind Spot Warning indicator. |
| Off | Stops the voltage to illuminate the Blind Spot Warning indicator. |
Was this page helpful?