Safety—Seats, seat belts and supplemental restraint system
Front power seat adjustment (if so equipped)
In this manual: Safety—Seats, seat belts and supplemental restraint system
~1min read
Operating tips
- The power seat motor has an autoreset overload protection circuit. If the motor stops during operation, wait 30 seconds then reactivate the switch.
- Do not operate the power seat switch for a long period of time when the engine is off. This will discharge the battery. For additional information, refer to “Automatic drive positioner” in the “Pre-driving checks and adjustments” section of this manual.
Forward and backward

Moving the switch as shown will slide the seat forward or backward to the desired position.
Reclining

Move the recline switch as shown until the desired angle is obtained.
The reclining feature allows adjustment of the seatback for occupants of different sizes for added comfort and to help obtain proper seat belt fit. For additional information, refer to “Precautions on seat belt usage” in this section. Also, the seatback can be reclined to allow occupants to rest when the vehicle is stopped and the shift lever is in P (Park).
Seat lifter (driver’s seat)

Move the switch as shown to adjust the angle and height of the seat cushion.
Lumbar support (driver’s seat)

The lumbar support feature provides adjustable lower back support to the driver. Push the switch as shown to adjust the seatback lumbar area.
Was this page helpful?