Front Seat
DRIVER SEAT WITH CLIMATE CONTROL
| 1. | Headrest | 2. | Seat cushion trim | 3. | Seat cushion pad |
| 4. | Seatback assembly | 5. | Seat cushion outer finisher (RH) | 6. | Seat belt buckle |
| 7. | Seat cushion inner finisher [RH (front)] | 8. | Seat cushion inner finisher [RH (rear)] | 9. | Slide finisher outer (RH) |
| 10. | Front slide finisher (RH) | 11. | Seat frame assembly | 12. | Front slide finisher (LH) |
| 13. | Seat cushion blower | 14. | Blower motor bracket | 15. | Blower motor nozzle |
| 16. | Slide finisher outer (LH) | 17. | Power seat switch | 18. | Seat slide knob |
| 19. | Seat recline knob | 20. | Lumbar support switch | 21. | Seat cushion outer finisher (LH) |
| 22. | Driver seat control unit | 23. | Seat cushion inner finisher [LH (rear)] | 24. | Seat cushion inner finisher [LH (front)] |
| 25. | Rear slide finisher | 26. | Seat back blower | 27. | Seat harness |
| 28. | Headrest holder (locked) | 29. | Headrest holder (free) | 30. | Climate controlled seat control unit |
| A. | Refer to Removal and Installation. |
DRIVER SEAT WITHOUT CLIMATE CONTROL
| 1. | Headrest | 2. | Seatback assembly | 3. | Seat cushion trim |
| 4. | Seat cushion pad | 5. | Seat cushion outer finisher (RH) | 6. | Seat belt buckle |
| 7. | Seat cushion inner finisher [RH (front)] | 8. | Seat cushion inner finisher [RH (rear)] | 9. | Slide finisher outer (RH) |
| 10. | Front seat heater (if equipped) | 11. | Front slide finisher (RH) | 12. | Seat frame assembly |
| 13. | Front slide finisher (LH) | 14. | Seat slide knob | 15. | Seat recline knob |
| 16. | Lumbar support switch | 17. | Seat cushion outer finisher (LH) | 18. | Power seat switch |
| 19. | Slide finisher outer (LH) | 20. | Driver seat control unit | 21. | Seat cushion inner finisher [LH (rear)] |
| 22. | Seat cushion inner finisher [LH (front)] | 23. | Rear slide finisher | 24. | Rear hinge cover |
| 25. | Seatback board | 26. | Seat harness | 27. | Headrest holder (locked) |
| 28. | Headrest holder (free) | A. | Rear hinge cover clips | B. | Seatback board clips |
| C. | Refer to Removal and Installation. |
DRIVER SEAT - MANUAL
| 1. | Headrest | 2. | Headrest holder (free) | 3. | Seat cushion trim |
| 4. | Seat cushion pad | 5. | Seat cushion outer finisher (RH) | 6. | Seat belt buckle |
| 7. | Seat cushion inner finisher [RH (front)] | 8. | Seat cushion inner finisher [RH (rear)] | 9. | Slide finisher outer (RH) |
| 10. | Front slide finisher (RH) | 11. | Seat frame assembly | 12. | Front slide finisher (LH) |
| 13. | Front seat heater (if equipped) | 14. | Lift lever | 15. | Recline lever finisher |
| 16. | Seat cushion outer finisher (LH) | 17. | Slide finisher outer (LH) | 18. | Seat cushion inner finisher [LH (rear)] |
| 19. | Seat cushion inner finisher [LH (front)] | 20. | Rear slide finisher | 21. | Rear hinge cover |
| 22. | Seatback assembly | 23. | Seatback board | 24. | Seat harness |
| 25. | Headrest holder (locked) | A. | Rear hinge cover clips | B. | Seatback board clips |
| C. | Refer to Removal and Installation. |
PASSENGER SEAT WITH CLIMATE CONTROL
| 1. | Headrest | 2. | Seat cushion trim | 3. | Seat cushion pad |
| 4. | Rear slide finisher | 5. | Seat cushion inner finisher [RH (front)] | 6. | Seat cushion outer finisher (RH) |
| 7. | Seat recline knob | 8. | Seat slide knob | 9. | Power seat switch |
| 10. | Seat cushion inner finisher [RH (rear)] | 11. | Slide finisher outer (RH) | 12. | Front slide finisher (RH) |
| 13. | Occupant Classification System control unit | 14. | Front slide finisher (LH) | 15. | Seat cushion blower |
| 16. | Blower motor bracket | 17. | Blower motor nozzle | 18. | Seat frame assembly |
| 19. | Occupant Classification System sensor | 20. | Occupant Classification System harness | 21. | Slide finisher outer (LH) |
| 22. | Seat cushion outer finisher (LH) | 23. | Seat belt buckle | 24. | Seat cushion inner finisher [LH (rear)] |
| 25. | Seat cushion inner finisher [LH (front)] | 26. | Seat back blower | 27. | Seat harness |
| 28. | Climate controlled seat control unit | 29. | Seatback assembly | 30. | Headrest holder (locked) |
| 31. | Headrest holder (free) | A. | Refer to Removal and Installation. |
PASSENGER SEAT WITHOUT CLIMATE CONTROL
| 1. | Seat harness | 2. | Headrest | 3. | Seat cushion trim |
| 4. | Seat cushion pad | 5. | Seat cushion inner finisher [RH (front)] | 6. | Seat cushion outer finisher (RH) |
| 7. | Seat recline knob | 8. | Seat slide knob | 9. | Power seat switch |
| 10. | Seat cushion inner finisher [RH (rear)] | 11. | Slide finisher outer (RH) | 12. | Front seat heater (if equipped) |
| 13. | Front slide finisher (RH) | 14. | Occupant Classification System control unit | 15. | Front slide finisher (LH) |
| 16. | Seat frame assembly | 17. | Occupant Classification System sensor | 18. | Occupant Classification System harness |
| 19. | Slide finisher outer (LH) | 20. | Seat cushion outer finisher (LH) | 21. | Seat belt buckle |
| 22. | Seat cushion inner finisher [LH (rear)] | 23. | Seat cushion inner finisher [LH (front)] | 24. | Rear slide finisher |
| 25. | Seat hinge cover | 26. | Seatback assembly | 27. | Seatback board |
| 28. | Headrest holder (locked) | 29. | Headrest holder (free) | A. | Rear hinge cover clips |
| B. | Seatback board clips | C. | Refer to Removal and Installation. |
PASSENGER SEAT - MANUAL
| 1. | Headrest | 2. | Seat cushion trim | 3. | Seat cushion pad |
| 4. | Seat cushion inner finisher [RH (rear)] | 5. | Seat cushion inner finisher [RH (front)] | 6. | Seat cushion outer finisher (RH) |
| 7. | Front slide finisher (RH) | 8. | Slide finisher outer (RH) | 9. | Front slide finisher (RH) |
| 10. | Front seat heater (if equipped) | 11. | Occupant Classification System control unit | 12. | Front slide finisher (LH) |
| 13. | Occupant Classification System harness | 14. | Seat frame assembly | 15. | Occupant Classification System sensor |
| 16. | Slide finisher outer (LH) | 17. | Seat cushion outer finisher (LH) | 18. | Seat belt buckle |
| 19. | Seat cushion inner finisher [LH (rear)] | 20. | Seat cushion inner finisher [LH (front)] | 21. | Rear slide finisher |
| 22. | Seat harness | 23. | Seat hinge cover | 24. | Seatback assembly |
| 25. | Headrest holder (locked) | 26. | Headrest holder (free) | 27. | Seatback board |
| A. | Rear hinge cover clips | B. | Seatback board clips | C. | Refer to Removal and Installation. |
DISASSEMBLY
Remove front seat. Refer to Removal and Installation.
Remove the seat hinge cover (if equipped). Refer to Seat Hinge Cover.
For models with climate controlled seats, perform the following steps:Release seatback J-hook (A) and position seatback flap (B) aside.



Press the headrest holder lock button and lift headrest up to remove from the seat back assembly.
Remove the seat cushion outer finisher (LH) (1).For power seat:

Remove screw (A).
Release metal clip (B) from the seat frame assembly (2), as shown.
: Metal clipRelease pawls and metal clip (C), then remove.
: Pawl
: Metal clipDisconnect the harness connectors from the power seat switch and the lumbar support switch (if equipped).
Release pawl and remove recline lever (1) as shown (
).
: PawlRemove screws and lift lever.

Release metal clip (B) from the seat frame assembly (1), as shown.
: Metal clipRelease pawls and metal clip (C), then remove.
: Pawl
: Metal clip
Release pawls and metal clip, and remove the seat cushion outer finisher (RH).

: Pawl
: Metal clip
Unclip the side air bag module harness from the seat frame assembly.
Disconnect the harness connector from the lumbar support motor (if equipped) and unclip the harness from the seatback assembly.
Disconnect the harness connector for the seatback heater (if equipped).
Disconnect the harness connector from the seat back blower (if equipped) and unclip the harness from the seatback assembly.
Reposition seat cushion assembly and remove screws (A), then remove the seat cushion inner finisher (LH/RH) (front) (1) and seat cushion inner finisher (LH/RH) (rear) (2).

Remove bolts (A) on both sides of the seatback assembly (1).

ASSEMBLY
Install all seatback assembly bolts and tighten evenly in the order shown.

Tighten the seatback assembly bolts to specification. Refer to Exploded View.
DISASSEMBLY
Remove the front seat. Refer to Removal and Installation.
Remove the seat cushion outer finisher (LH) (1).For power seat:

Remove screw (A).
Release metal clip (B) from the seat frame assembly (2), as shown.
: Metal clipRelease pawls and metal clip (C), then remove.
: Pawl
: Metal clipDisconnect the harness connectors from the power seat switch and the lumbar support switch (if equipped).
Release pawl and remove recline lever (1) as shown (
).
: PawlRemove screws and lift lever.

Release metal clip (B) from the seat frame assembly (1), as shown.
: Metal clipRelease pawls and metal clip (C), then remove.
: Pawl
: Metal clip
Release pawls and metal clip and remove the seat cushion outer finisher (RH).

: Pawl
: Metal clip
For models with climate controlled seats, release seatback J-hook (A) and position seatback flap (B) aside.

Remove the seat cushion from the seat frame assembly using the following procedure.Release the rear J-hooks.
For models with climate controlled seats, release the rear J-hooks (A) from the seat frame assembly.

For models without climate controlled seats, release the rear hinge cover J-hooks (A) from the seat frame assembly (1).


Remove the hog rings and separate the seat cushion trim and seat cushion pad.
ASSEMBLY
Assembly is in the reverse order of disassembly.
Install new hog rings on the seat cushion trim in original positions.

Use only one hog ring in each designated location.
Make sure hog rings are correctly fastened around both the seat cushion trim and seat cushion pad wires.
Use NISSAN standard hog rings and tools to assemble.
Make sure hook fastener is pressed into place after seat cushion trim is assembled.
Smooth out all wrinkles during assembly.