Instruments and controls
How to arm the vehicle security system
In this manual: Instruments and controls
4steps
~24min
2/5difficulty
Done 0 of 4
- Close all windows and the moonroof (if so equipped). The system can be armed even if the windows and moonroof are open.
- Remove the Intelligent Key fromthe vehicle.
- Close all doors, hood and liftgate. Lock all doors. The doors can be locked with the Intelligent Key, door handle request switch, power door lock switch or mechanical key (if so equipped).
Key fob operation:
- Confirm that the
indicator light comes on. The
indicator stays illuminated for a period of time indicating that the system is in the pre-armed phase.The
indicator light will blink every 3 seconds once the security system is armed.If during the pre-armed phase one of the following occurs, the system will not arm:
- Any door is unlocked with the mechanical key (if so equipped).
- A door is opened with the release button with the Intelligent Key on your person.
- The doors are unlocked using the unlock button on the Intelligent Key.
- The ignition switch is placed in the ACC or ON position.
- Even when the driver and/or passengers are in the vehicle, the system will activate when all the doors, hood and liftgate are locked with the ignition switch placed in the LOCK position. When placing the ignition switch in the ACC or ON position, the system will be released.
Was this page helpful?