Pre-driving checks and adjustments
Intelligent Key button operation light
In this manual: Pre-driving checks and adjustments
~1min read

The light blinks only when you push any button on the Intelligent Key. The light illumination only signifies that the key fob has transmitted a signal. You may look and/or listen to verify that the vehicle has performed the intended operation. The number of blinks identifies each registered key (i.e. 1 blink = 1st key,...,4 blinks = 4th key) for your own identification purposes.
If the light does not blink, your battery may be too weak to communicate to the vehicle. If this occurs, the battery may need to be replaced. For additional information regarding the replacement of a battery, refer to “Battery replacement” in the “Do-ityourself” section of this manual.
Was this page helpful?