Outside mirrors
- Do not adjust the mirrors while driving. You could lose control of your vehicle and cause an accident.
- Objects viewed in the outside mirror on the passenger side are closer than they appear. Be careful when moving to the right. Using only this mirror could cause an accident. Use the inside mirror or glance over your shoulder to properly judge distances to other objects.
Electric control type

The outside mirror remote control will operate only when the ignition switch is in the ACC or ON position.
Move the small switch
to select the left or right mirror. Adjust each mirror to the desired position using the large switch
. Move the small switch to the center (neutral) position to prevent accidentally moving the mirror.
Manual folding outside mirrors

Pull the outside mirror toward the door to fold it.
Reverse tilt-down feature (if so equipped)
The reverse tilt-down feature will turn both outside mirror surfaces downward to provide better rear visibility close to the vehicle when the mirror control switch is in either the L or R position.
The mirrors automatically return to their original position when you shift out of R (Reverse).
The outside mirror surfaces will return to their original position when one of the following has occurred:
- The shift lever is moved to any position other than R (Reverse).
- The outside mirror control switch is set to the neutral or center position.
- The ignition switch is placed in the OFF position.
For additional information regarding this feature, refer to “Automatic drive positioner” in this section.
Heated mirrors (if so equipped)
Some outside mirrors can be heated to defrost, defog, or de-ice for improved visibility. For additional information, refer to “Rear window and outside mirror (if so equipped) defroster switch” in the “Instruments and controls” section of this manual.