Body Interior

Power Seat System

~1min read
Component Parts Location
A. Front seat RH (view with cushions removed) B. RH side of front seat RH C. Front seat LH (view with cushions removed)
D. LH side of front seat LH
No.ComponentFunction
1.

BCM

(Body Control Module)
Supplies the power received from battery to power seat switch.
2. Reclining motor RH Refer to Reclining Motor .
3. Sliding motor RH Refer to Sliding Motor.
4. Power seat switch RH Refer to Power Seat Switch.
5. Reclining motor LH Refer to Reclining Motor .
6. Lifting motor LH (front) Refer to Lifting Motor .
7. Sliding motor LH Refer to Sliding Motor.
8. Lifting motor LH (rear) Refer to Lifting Motor .
9. Power seat switch LH Refer to Power Seat Switch.
Power Seat Switch
  • Installed on seat cushion outer finisher. (LH shown, RH similar)

  • Built-in reclining switch, sliding switch and lifting switch, controls the power supplied to each motor.

Sliding Motor
  • Sliding motor is installed to the seat frame assembly.

  • Slides the seat forward/backward by changing the rotation direction of sliding motor.

Lifting Motor
  • Lifting motor is installed to seat frame assembly [Only front seat LH is equipped with a lifting motor (front) and a lifting motor (rear)].

  • Seat frame assembly is moved upward/downward by changing the rotation direction of lifting motor.

Reclining Motor
  • Reclining motor is installed to seat frame assembly.

  • Seat back is reclined forward/backward by changing the rotation direction of reclining motor.