Pre-driving checks and adjustments
Remote starting the vehicle
In this manual: Pre-driving checks and adjustments
3steps
~18min
2/5difficulty
Done 0 of 3
To use the Remote Engine Start feature perform the following:
- Aim the Intelligent Key at the vehicle.
- Press the
button to lock all doors. - Within 5 seconds press and hold the
button until the turn signal lights flash and the tail lamps turn on. If the vehicle is not within view press and hold the
button for at least 2 seconds.
The following events will occur when the engine starts:
- The parking lights will turn on and remain on as long as the engine is running.
- The doors will be locked and the climate control system may come on.
- The engine will continue to run for 10 minutes. Repeat the steps to extend the time for an additional 10 minutes. For additional information, refer to “Extending engine run time” in this section.
Press and hold the brake pedal while switching the ignition to the ON position before driving. For additional information, refer to “Driving the vehicle” in the “Starting and driving” section of this manual.
Was this page helpful?