Safety—Seats, seat belts and supplemental restraint system
Remove and Install
In this manual: Safety—Seats, seat belts and supplemental restraint system
8steps
~48min
2/5difficulty
Done 0 of 8
Remove
Use the following procedure to remove the head restraint/headrest:
- Pull the head restraint/headrest up to the highest position.
- Push and hold the lock knob.
- Remove the head restraint/headrest from the seat.

- Store the head restraint/headrest properly in a secure place so it is not loose in the vehicle.
- Reinstall and properly adjust the head restraint/headrest before an occupant uses the seating position.
Install
- Align the head restraint/headrest stalks with the holes in the seat. Make sure that the head restraint/headrest is facing the correct direction. The stalk with the notch (notches)
must be installed in the hole with the lock knob
.
- Push and hold the lock knob and push the head restraint/headrest down.
- Properly adjust the head restraint/ headrest before an occupant uses the seating position.
Was this page helpful?