Body Interior

Seat Back Blower

14steps
~84min
3/5difficulty
Done 0 of 14
Component Function Check

CHECK SEAT BACK BLOWER FUNCTION

When turning the climate controlled seat switch to the COOL mode position, check that the seat back blower is operated in each specific mode.

Is the inspection result normal?

YES>>

Inspection End.

NO>>

Refer to Diagnosis Procedure.

Diagnosis Procedure

CHECK SEAT BACK BLOWER POWER SUPPLY

  1. Ignition switch ON.

  2. Check voltage between seat back blower harness connector and ground.

    (+)(–)Condition

    Voltage

    (Approx.)
    Seat back blower
    ConnectorTerminal
    LH B212 1 Ground Climate controlled seat switch COOL mode Battery voltage
    Other than above 0 V
    RH B308 Climate controlled seat switch COOL mode Battery voltage
    Other than above 0 V

Is the inspection result normal?

YES>>

GO TO 3.

NO>>

GO TO 2.

CHECK SEAT BACK BLOWER POWER SUPPLY CIRCUIT

  1. Ignition switch OFF.

  2. Disconnect seat back blower connector and climate controlled seat control unit connector.

  3. Check continuity between seat back blower harness connector and climate controlled seat control unit harness connector.

    Seat back blowerClimate controlled seat control unitContinuity
    ConnectorTerminalConnectorTerminal
    LH B212 1 B203 11 Yes
    RH B308 B320
  4. Check continuity between seat back blower harness connector and ground.

    Seat back blowerGroundContinuity
    ConnectorTerminal
    LH B212 1 Ground No
    RH B308

Is the inspection result normal?

YES>>

Replace climate controlled seat control unit. Refer to Climate Controlled Seat Control Unit.

NO>>

Repair or replace harness.

CHECK SEAT BACK BLOWER SPEED CONTROL SIGNAL

Check voltage between seat back blower harness connector and ground.

(+)(–)Condition

Voltage

(Approx.)
Seat back blower
ConnectorTerminal
LH B212 2 Ground Climate controlled seat switch COOL HI Battery voltage
MID 9.0 V
LO 8.0 V
Other than above 0 V
RH B308 Climate controlled seat switch COOL HI Battery voltage
MID 9.0 V
LO 8.0 V
Other than above 0 V

Is the inspection result normal?

YES>>

GO TO 5.

NO>>

GO TO 4.

CHECK SEAT BACK BLOWER SPEED CONTROL SIGNAL CIRCUIT

  1. Ignition switch OFF.

  2. Disconnect seat back blower connector and climate controlled seat control unit connector.

  3. Check continuity between seat back blower harness connector and climate controlled seat control unit harness connector.

    Seat back blowerClimate controlled seat control unitContinuity
    ConnectorTerminalConnectorTerminal
    LH B212 2 B203 5 Yes
    RH B308 B320
  4. Check continuity between climate controlled seat back blower motor harness connector and ground.

    Seat back blower—Continuity
    ConnectorTerminal
    LH B212 2 Ground No
    RH B308

Is the inspection result normal?

YES>>

Replace climate controlled seat control unit. Refer to Climate Controlled Seat Control Unit.

NO>>

Repair or replace harness.

CHECK SEAT BACK BLOWER GROUND CIRCUIT

  1. Ignition switch OFF.

  2. Disconnect seat back blower connector and climate controlled seat control unit connector.

  3. Check continuity between seat back blower harness connector and climate controlled seat control unit harness connector.

    Seat back blowerClimate controlled seat control unitContinuity
    ConnectorTerminalConnectorTerminal
    LH B212 3 B203 21 Yes
    RH B308 B320
  4. Check continuity between climate controlled seat back blower motor harness connector and ground.

    Seat back blower—Continuity
    ConnectorTerminal
    LH B212 3 Ground No
    RH B308

Is the inspection result normal?

YES>>

Replace seat back blower. Refer to Exploded View.

NO>>

Repair or replace harness.