Cruise Control & Driver Assistance

System Settings Cannot Be Turned On/off

4steps
~24min
2/5difficulty
Done 0 of 4
Diagnosis Procedure

System setting is not selectable on the combination meter.

  • Intelligent Forward Collision Warning (I-FCW)

  • Intelligent Drive Alertness (I-DA)

  • Traffic Sign Recognition (TSR)

  • Rear Automatic Braking (RAB)

  • Lane Departure Warning (LDW)

  • Blind Spot Warning (BSW)

  • Intelligent Lane Intervention (I-LI)

  • Rear Cross Traffic Alert (RCTA)

CHECK SYSTEM SETTING

  1. Start the engine.

  2. Check that the each system settings is selectable on the combination meter.

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

GO TO 3.

PERFORM THE SELF-DIAGNOSIS

CONSULT

  1. Perform “All DTC Reading”.

  2. Check if the DTC is detected in self-diagnosis results of “ICC/ADAS” and “METER/M&A”. Refer to the following.

    • ICC/ADAS: Refer to DTC Index.

    • METER/M&A: Refer to DTC Index.

Is any DTC detected?

YES>>

Repair or replace malfunctioning parts.

NO>>

Inspection End

CHECK STEERING SWITCH

Operate the steering switch to check that the information display on the combination meter operate properly.

Is the inspection result normal?

YES>>

Replace the ADAS control unit.

  • ADAS control unit: Refer to Removal and Installation.

NO>>

Repair or replace malfunctioning parts.