Pre-driving checks and adjustments
Tilt and telescopic operation
In this manual: Pre-driving checks and adjustments
~1min read

To adjust the steering wheel move the switch
in the following directions:
- Adjust the steering wheel up or down in direction
to the desired tilt position. - Adjust the steering wheel forward or backward in direction
to the desired telescopic position.
For vehicles with automatic drive positioner: Both the tilt and telescopic steering operation must be reset after the vehicle’s battery has been discharged in order to prevent the tilt and telescopic operation from locking in one position. When the battery has been recharged or replaced, perform the following:
- For tilt operation, adjust the switch
so the steering wheel moves to the highest position
that can be reached. - For telescopic operation, adjust the switch
so the steering wheel moves to the most forward and backward position
that can be reached.
Performing these operations resets the range of the steering wheel’s tilt and telescopic function.
Was this page helpful?