Restraints

Zero Point Reset

3steps
~18min
2/5difficulty
Done 0 of 3
Description

Zero point reset is an initializing procedure for the OCS (weight) sensors that must be performed using CONSULT when removing and installing passenger seat or servicing the OCS system, including removing or installing OCS control unit and sensors. If zero point reset is not performed, the initialization is incomplete and OCS may not operate normally.

Special Repair Requirement

PERFORM ZERO POINT RESET

  1. Perform preliminary checks.

  2. Select “Start” on “Zero point reset function” screen from “Work support” mode of “OCCUPANT DETECTION”.

  3. “Zero point reset function” starts.

>>

GO TO 2.

CONFIRM RESET

Check that “Complete” is displayed on “Zero point reset function”.

Is zero point reset status “complete”?

YES>>

Print out “Zero point reset current status” screen. Inspection End.

NO>>

Recheck the preliminary check items and perform zero point reset again.