Nissan Rogue Quiz
Instruments and controls

Reprogramming a single HomeLink® button

In this manual: Instruments and controls
Foreword — 6Nissan customer care program — 1Illustrated table of contents — 10Safety — Seats, seat belts and supplemental restraint system — 43Instruments and controls — 90Pre-driving checks and adjustments — 43Center display, heater, air conditioner, audio, phone and voice recognition systems — 105Starting and driving — 59In case of emergency — 21Appearance and care — 22Maintenance and do-it-yourself — 66Technical and consumer information — 64
~1min read

To reprogram a HomeLink® Universal Transceiver button, complete the following.

1. Push and hold the desired HomeLink® button. Do not release the button until step 4 has been completed.

2. When the indicator light begins to flash slowly (after 20 seconds), position the hand-held transmitter 2 to 5 in (50 to 127 mm) away from the HomeLink® surface.

3. Push and hold the hand-held transmitter button.

4. The HomeLink® indicator light will flash, first slowly and then rapidly. When the indicator light begins to flash rapidly, release both buttons.

The HomeLink® Universal Transceiver button has now been reprogrammed. The new device can be activated by pushing the HomeLink® button that was just programmed. This procedure will not affect any other programmed HomeLink® buttons.

Test yourself

A quick Nissan Rogue quiz: every answer comes with an explanation and a link to the manual page.