Nissan Rogue Quiz
Center display, heater, air conditioner, audio, phone and voice recognition systems

Heater operation

In this manual: Center display, heater, air conditioner, audio, phone and voice recognition systems
Foreword — 6Nissan customer care program — 1Illustrated table of contents — 10Safety — Seats, seat belts and supplemental restraint system — 43Instruments and controls — 90Pre-driving checks and adjustments — 43Center display, heater, air conditioner, audio, phone and voice recognition systems — 105Starting and driving — 59In case of emergency — 21Appearance and care — 22Maintenance and do-it-yourself — 66Technical and consumer information — 64
~2min read

Heating:

This mode is used to direct heated air to the foot outlets.

1. Push the air recirculation button to the to the OFF position. (The indicator light turns off.) 2. Turn the air flow control dial to the position. position.

3. Turn the fan speed control to the dial to the desired position.

4. Turn the temperature control dial to the desired position between the middle and the hot (right) position.

Ventilation:

This mode directs outside air to the side and center ventilators.

1. Push the air recirculation button to the to the OFF position. (The indicator light turns off.) 2. Turn the air flow control dial to the position. position.

3. Turn the fan speed control to the dial to the desired position.

4. Turn the temperature control dial to the desired position.

Defrosting or defogging:

This mode directs the air to the defroster outlets to defrost/defog the windows.

1. Turn the air flow control dial to the position.

2. Turn the fan speed control dial to the desired position. desired position.

3. Turn the temperature control dial to the dial to the desired position between the middle and the hot (right) position.

- To remove frost from the outside surface of the windshield quickly, turn the temperature control dial to the maximum hot position and the fan speed control maximum dial to maximum (HI) position.

- If it is difficult to defog the windshield, turn the A/C button on.

Bi-level heating:

This mode directs cool air from the side and center vents and warm air from the foot outlets.

When the temperature control dial is turned to the maximum hot or cool position, the air between the ventilators and the foot outlets is the same temperature.

1. Push the air recirculation button to the to the OFF position. (The indicator light turns off.) 2. Turn the air flow control dial to the position. position.

3. Turn the fan speed control to the dial to the desired position.

4. Turn the temperature control dial to the desired position.

Heating and defogging:

This mode heats the interior and defogs the windows.

1. Turn the air flow control dial to the position. position.

2. Turn the fan speed control to the dial to the desired position.

3. Turn the temperature control dial to the desired position.

Test yourself

A quick Nissan Rogue quiz: every answer comes with an explanation and a link to the manual page.