Nissan Rogue Quiz
Maintenance and do-it-yourself

Replacing

In this manual: Maintenance and do-it-yourself
Foreword — 6Nissan customer care program — 1Illustrated table of contents — 10Safety — Seats, seat belts and supplemental restraint system — 43Instruments and controls — 90Pre-driving checks and adjustments — 43Center display, heater, air conditioner, audio, phone and voice recognition systems — 105Starting and driving — 59In case of emergency — 21Appearance and care — 22Maintenance and do-it-yourself — 66Technical and consumer information — 64
~1min read
Replace the wiper blades if they are worn.

Replace the wiper blades if they are worn.

1. Lift the wiper arm away from the windshield.

2. Push and hold the release tab A , and move the wiper blade down the wiper arm 1 .

3. Insert the new wiper blade onto the wiper arm until a click sounds.

4. Rotate the wiper blade so that the dimple is in the groove.

- After wiper blade replacement, return

- After wiper blade replacement, return the wiper arm to its original position; otherwise it may be damaged when the hood is opened.

- Make sure the wiper blades contact the glass; otherwise the arm may be damaged from wind pressure.

Be careful not to clog the washer nozzle A .

Be careful not to clog the washer nozzle A .

This may cause improper windshield washer operation. If the nozzle is clogged, remove any objects with a needle or small pin B . Be careful not to damage the nozzle.

Test yourself

A quick Nissan Rogue quiz: every answer comes with an explanation and a link to the manual page.