Opel Corsa Quiz
Fuel and exhaust systems - fuel-injected models

Air cleaner housing - removal and refitting

In this manual: Fuel and exhaust systems - fuel-injected models
Routine maintenance and servicing — 18OHV engine — 17OHC engines — 14DOHC (16-valve) engine — 12Cooling, heating and ventilation systems — 10Fuel and exhaust systems - carburettor models — 25Fuel and exhaust systems - fuel-injected models — 12Starting and charging systems — 9Contact breaker ignition system — 10Electronic (breakerless) ignition systems — 8Braking system — 23Suspension and steering — 25Bodywork and fittings — 21Body electrical system — 21Wiring diagrams — 1Reference — 25
~1min read

Removal

1.4 and 1.6 litre models

1. Refer to the information given for the carburettor models. For information on the air temperature control system.

1.8 and 2.0 litre 8-valve models

2. Remove the air cleaner element.

3. Disconnect the air intake tube then undo the retaining screws and remove the housing from the engine compartment.

2.0 litre 16-valve models

4. Remove the trunking which connects the air cleaner to the air mass meter.

5. Remove the three bolts which secure the air cleaner. Remove the air cleaner (see illustrations).

Fuel and exhaust systems - fuel-injected models
Two of the air cleaner securing bolts (arrowed) - 2.0 litre 16-valve

Fuel and exhaust systems - fuel-injected models
The third air cleaner bolt - 2.0 litre 16-valve

Fuel and exhaust systems - fuel-injected models
Removing the air cleaner - 2.0 litre 16-valve

Refitting

6. Refit by reversing the removal operations.

Test yourself

A quick Opel Corsa quiz: every answer comes with an explanation and a link to the manual page.