Locking the vehicle with exterior perimeter monitoring only

Deactivate the interior volumetric monitoring to avoid unwanted triggering of the alarm in certain cases such as:

- leaving a pet in the vehicle,
- leaving a window partially open,
- washing your vehicle.

Deactivation of the interior volumetric monitoring

Switch off the ignition.
Within ten seconds, press the button until the indicator lamp is on continuously.

Get out of the vehicle.
Press the locking button on the remote control immediately.

The exterior perimeter monitoring alone is activated: the indicator lamp in the button flashes once per second.

To be effective, this deactivation must on the remote control. be carried out each time the ignition is switched off.

Reactivation of the interior volumetric monitoring

Press the unlocking button on the remote control to deactivate the exterior perimeter monitoring.

Press the locking button on the remote control to activate all the monitoring functions.

The indicator lamp in the button again flashes once per second.