Checking tyre pressures / inflating accessories

You can also use the compressor, without injecting any product, to:

- check or adjust the pressure of your tyres,
- inflate other accessories (balls, bicycle tyres...).

• Turn the selector A to the "Air" position.
• Uncoil the black pipe H fully.
• Connect the black pipe to the valve of the wheel or accessory. If necessary, fit one of the adaptors supplied with the kit first.

• Connect the compressor's electrical connector to the vehicle's 12 V socket.
• Start the vehicle and let the engine run.
• Adjust the pressure using the compressor (to inflate: switch B in position "I" ; to deflate: switch B in position "O" and press button C), according to the vehicle's tyre pressure label or the accessory's pressure label.
• Remove the kit then stow it.