Access to the spare wheel

The spare wheel is installed in the boot under the floor.

According to country, the spare wheel may be steel, alloy or of the "space-saver" type. To gain access to it, refer to the paragraph "Access to the tools" on the previous page.

Taking out the wheel

• Unscrew the yellow central bolt.
• Raise the spare wheel towards you from the rear.
• Take the wheel out of the boot.

Putting the wheel back in place

• Put the wheel back in its housing.
• Unscrew the yellow central bolt by a few turns then put it in place in the centre of the wheel.
• Tighten fully until the central bolt clicks to retain the wheel correctly.

Put the box back in the centre of the wheel and clip it in place.