Estate version

Position/brake lights and turn signals

Remove the cover to access nut 5.

Loosen nut 5.

Remove screws 6.

Pull the light unit rearwards (movement C).

Remove the bulb holder by carefully releasing clips 7, then gently pull the bulb holder out.

Replace the bulb.

Install the bulb holder and push the unit fully in until it locks.

Check that the lights are correctly locked in place.

Tighten screws 6 and nut 5.

Refit the cover.

8 Position light and brake light. Bulb type: P21/5W.

9 Turn signal indicator lamp. Bulb type: PY21W.