Seat cushion trim

REMOVAL

Remove:

• the seat (see chapter 75A-A) (observe safety rules).

Unclip the seat cushion height adjustment handle using a flat-blade screwdriver.

Remove the housing screw (A).

Remove the housing screw (B).

Release the housing.

Remove the rivets from the height adjustment mechanism (C).

Remove the mechanism and the control.

Remove:

• the cover elastic bands (D),
• the cover flap.

Release the lower retaining elastics of the seatback cover.

Unclip the backrest cover rear retaining clips (E).

Remove the backrest cover retaining profiles (F).

Remove the retaining clip (G).

Release the cover retaining profiles (H).

Release the cover retaining profile (I).

Carefully release the cover, holding the foam's velcro strips so as not to damage the seat cushion foam.

Remove:

• the seat cushion cover,
• the foam.

Remove the cover retaining clips (J).

INSTALLATION

Refit in the reverse order of removal.

Before refitting the backrest cover, check the bonding of the Velcro strips on the seat cushion foam.