Renault Megane Quiz
Trim and upholstery

Backrest trim 2/3 - 1/3

In this manual: Trim and upholstery
Engine and peripherals — 141Chassis — 79Chassis — 72Renault Mégane III Driver's Manual — 87Electrical equipment — 221Engine and peripherals — 47Electrical equipment — 80Transmission — 14Air conditioning — 30Bodywork — 115Trim and upholstery — 44General vehicle information — 27Air conditioning — 59General vehicle information — 16Transmission — 38Sealing and soundproofing — 7General vehicle information — 3
~1min read

Tightening torques
Backrest frame fixing lug screw 35 N.m
Armrest fixing screw - frame 18 N.m

REMOVAL

Remove the backrest (see chapter 76A-A).

Garniture de dossier 2/3 - 1/3

Remove the head restraints.

Garniture de dossier 2/3 - 1/3

Unclip the release control trim (A).

Remove the screw (B).

Release the seat belt webbing trim.

Garniture de dossier 2/3 - 1/3

Remove the screws (C) and (D).

Release:

  • the armrest from its support,
  • the backrest fixing lug.
Garniture de dossier 2/3 - 1/3

Open both zips.

Garniture de dossier 2/3 - 1/3

Partially remove the cover to access the head restraint guides.

Garniture de dossier 2/3 - 1/3

Apply pressure on the guide clips (E).

Carefully release the head restraint guides to avoid damaging the upper part of the cover.

Garniture de dossier 2/3 - 1/3

Unclip the card trim retaining clip.

WARNING:

When separating the "cover-foam" assembly, hold the Velcro strips (risk of damaging the foam).

Garniture de dossier 2/3 - 1/3

Peel off the Velcro strips.

INSTALLATION

Tighten to torque.

Refit in the reverse order of removal.

Use tool Car. 1558 (blue) for the cover zip.

Test yourself

A quick Renault Megane quiz: every answer comes with an explanation and a link to the manual page.