Renault Megane Quiz
Bodywork

Front central floor side cross member

In this manual: Bodywork
Engine and peripherals — 141Chassis — 79Chassis — 72Renault Mégane III Driver's Manual — 87Electrical equipment — 221Engine and peripherals — 47Electrical equipment — 80Transmission — 14Air conditioning — 30Bodywork — 115Trim and upholstery — 44General vehicle information — 27Air conditioning — 59General vehicle information — 16Transmission — 38Sealing and soundproofing — 7General vehicle information — 3
~1min read

This part may be replaced in two ways:

  • complete: operation linked to partial dash panel replacement for a side collision,
  • partial: per cut (a), additional operation to the front footwell panel replacement and partial central floor side section replacement for a front side collision.

In the method described below, you will only find the descriptions and joins specific to the part concerned.

Information on related parts is covered in their respective sections (see contents).

Note: If the spot welds cannot be made with the spot welder, they may be replaced with plug welds.

REPLACEMENT PART CONTENTS

Part assembled with:
Cross member reinforcement
Impact reinforcement
Swaged nut

Traverse latérale avant de plancher central

PARTS CONCERNED (thickness in mm):

  1. Central floor front side cross member 1.2

Partial replacement per cut (a)

Traverse latérale avant de plancher central

Note: The cut is made flush with the front side member.

Complete replacement

Traverse latérale avant de plancher central

Test yourself

A quick Renault Megane quiz: every answer comes with an explanation and a link to the manual page.