Starting and operating

BSD/RCTA OFF indicator

4steps
~24min
2/5difficulty
Done 0 of 4

System temporary stops

Subaru Ascent BSD RCTA OFF indicator temporary stop message on dashboard display
  1. BSD/RCTA temporary stop message
  2. BSD/RCTA OFF indicator

In the Subaru Ascent, this message is displayed when the BSD/RCTA system is temporarily suspended due to external or internal conditions that prevent accurate operation.

  • Extremely high or extremely low ambient temperatures affecting sensor performance
  • Irregular or unstable voltage levels from the vehicle battery
  • Significant misalignment or disruption of the radar sensors installed in the rear bumper

Once these conditions return to normal, the Subaru Ascent BSD/RCTA system will automatically resume operation, and the indicator will disappear from the display.

If the indicator remains visible for an extended period, it is strongly recommended to have your Subaru Ascent inspected by an authorized SUBARU dealer to ensure proper system functionality.

System temporary stops due to reduced radar sensitivity

Subaru Ascent BSD RCTA reduced radar sensitivity warning indicator display
  1. BSD/RCTA temporary stop message due to reduced radar sensitivity
  2. BSD/RCTA OFF indicator

This notification appears when the radar sensors in the Subaru Ascent experience reduced sensitivity, which may limit their ability to detect surrounding vehicles accurately. Such situations can occur due to environmental interference, dirt accumulation, or adverse weather conditions.

After the radar conditions improve, the system will automatically recover and resume full functionality. However, if the message persists, professional inspection at a SUBARU dealership is advised.