Instruments and controls

Initial illumination for system check

~2min read

When the ignition switch of the Subaru Ascent is turned to the "ON" position, multiple warning and indicator lights illuminate briefly and then turn off. This built-in self-check confirms that the systems and indicator bulbs are functioning correctly.

To perform this system check, apply the parking brake and switch the ignition to the "ON" position. The following indicators will illuminate and then turn off after a few seconds or once the engine starts.

Subaru Ascent driver seatbelt warning light indicator Seatbelt warning light (The seatbelt warning light turns off only when the driver fastens the seatbelt.)

Subaru Ascent front passenger seatbelt warning light indicator Front passenger's seatbelt warning light (The seatbelt warning light turns off only when the front seat passenger fastens the seatbelt.)

Subaru Ascent rear seatbelt warning light indicator Rear seatbelt warning light

Subaru Ascent SRS airbag system warning light indicator SRS airbag system warning light

Subaru Ascent front passenger airbag ON indicator light Front passenger's frontal airbag ON indicator light

Subaru Ascent front passenger airbag OFF indicator light Front passenger's frontal airbag OFF indicator light

Subaru Ascent check engine warning light indicator CHECK ENGINE warning light/ Malfunction indicator light

Subaru Ascent battery charge warning light indicator Charge warning light

Subaru Ascent oil pressure warning light indicator Oil pressure warning light

Subaru Ascent low tire pressure warning light indicator Low tire pressure warning light (U.S.- spec. models)

Subaru Ascent ABS warning light indicator ABS warning light

Subaru Ascent brake system warning light indicator Brake system warning light

Subaru Ascent low fuel warning light indicator Low fuel warning light

Subaru Ascent power steering warning light indicator Power steering warning light

Subaru Ascent vehicle dynamics control warning and operation indicator Vehicle Dynamics Control warning light/ Vehicle Dynamics Control operation indicator light

Subaru Ascent vehicle dynamics control OFF indicator light Vehicle Dynamics Control OFF indicator light

Subaru Ascent electronic parking brake indicator light Electronic parking brake indicator light

If any of these indicators fail to illuminate during startup in the Subaru Ascent, it may indicate a burned-out bulb or a malfunction in the corresponding system.

In such cases, it is strongly recommended to contact an authorized SUBARU dealer for inspection and repair to ensure continued safe operation of the Subaru Ascent.

Additional note: Regular monitoring of warning and indicator lights in your Subaru Ascent is essential for early detection of potential issues and helps maintain optimal vehicle safety and performance.