In case of emergency

Rear gate - if the rear gate cannot be opened

~1min read

If the rear gate of your Subaru Ascent cannot be opened using the standard external button, it is possible to unlock it manually from inside the cargo area as an emergency measure.

Subaru Ascent rear gate interior access panel removal location

1. Carefully remove the access panel located at the lower center of the rear gate trim. Use a flat-head screwdriver wrapped in cloth or tape to prevent scratching interior surfaces.

2. Behind the trim, locate the internal rear gate release lever.

CAUTION

Do not attempt to operate the rear gate release lever using your fingers, as this may result in injury. Always use a suitable tool such as a flat-head screwdriver.

Subaru Ascent manual rear gate lever operation without power liftgate
Models without power rear gate

Subaru Ascent manual rear gate lever operation with power liftgate system
Models with power rear gate

3. To open the rear gate, rotate the internal lever toward the right until the latch releases and the gate can be opened.

For improved reliability, periodically check the condition of your Subaru Ascent key fob battery and ensure that all access mechanisms are functioning properly, as this helps prevent unexpected issues during daily use.