Subaru Forester Quiz
Maintenance and service

Parking brake lining

In this manual: Maintenance and service
Foreword — 1Warranties — 5How to use this Owner’s Manual — 5Vehicle symbols — 1Safety precautions when driving — 14General information — 1Illustrated index — 7Function settings — 1Seat, seatbelt and SRS airbags — 77Keys and doors — 169Climate control — 54Audio — 189Interior equipment — 38Starting and operating — 85Driving tips — 49In case of emergency — 21Appearance care — 17Maintenance and service — 103Specifications — 21Consumer information and Reporting safety defects — 31
~1min read

1. Drive the vehicle at a speed of approximately 35 km/h.

2. With the parking brake release button pushed in, pull the parking brake lever SLOWLY and GENTLY (pulling with a force of approximately 33 lbf [147 N, 15 kgf]).

3. Drive the vehicle for approximately 220 yards (200 meters) in this condition.

4. Wait 5 to 10 minutes for the parking brake to cool down. Repeat this procedure.

5. Check the parking brake stroke. If the parking brake stroke is out of the specified range, adjust it by turning the adjusting nut located on the parking brake lever.

A safe location and situation should

A safe location and situation should be selected for break-in driving.

Pulling the parking brake lever too

Pulling the parking brake lever too forcefully may cause the rear wheels to lock. To avoid this, be certain to pull the lever up slowly and gently.

Test yourself

A quick Subaru Forester quiz: every answer comes with an explanation and a link to the manual page.