Subaru Forester Quiz
Maintenance and service

High beam light bulbs

In this manual: Maintenance and service
Foreword — 1Warranties — 5How to use this Owner’s Manual — 5Vehicle symbols — 1Safety precautions when driving — 14General information — 1Illustrated index — 7Function settings — 1Seat, seatbelt and SRS airbags — 77Keys and doors — 169Climate control — 54Audio — 189Interior equipment — 38Starting and operating — 85Driving tips — 49In case of emergency — 21Appearance care — 17Maintenance and service — 103Specifications — 21Consumer information and Reporting safety defects — 31
~1min read

Right-hand side
Right-hand side

1. Use a screwdriver to undo the clips on the air intake duct, then remove the air intake duct (right-hand side).

2. Disconnect the electrical connector

2. Disconnect the electrical connector from the bulb.

3. Remove the bulb from the headlight

3. Remove the bulb from the headlight assembly by turning it counterclockwise.

4. Replace the bulb with new one. At this time, use care not to touch the bulb surface.

5. To install the bulb to the headlight assembly, turn it clockwise until it clicks.

6. Reconnect the electrical connector.

7. Install the air intake duct with clips (right-hand side).

Test yourself

A quick Subaru Forester quiz: every answer comes with an explanation and a link to the manual page.