Subaru Impreza Quiz
Seat, seatbelt and SRS airbags

Unfastening the seatbelt

In this manual: Seat, seatbelt and SRS airbags
Foreword — 1Warranties — 5How to use this Owner’s Manual — 5Vehicle symbols — 1Safety precautions when driving — 14Illustrated index — 7Function settings — 1Seat, seatbelt and SRS airbags — 75Keys and doors — 66Instruments and controls — 121Climate control — 42Audio — 168Interior equipment — 29Starting and operating — 111Driving tips — 31In case of emergency — 21Appearance care — 16Maintenance and service — 109Specifications — 21Consumer information and Reporting safety defects — 31
~1min read

Push the release button of the center seatbelt buckle (on the left-hand side) to unfasten the seatbelt.
Unfastening the seatbelt

Push the release button of the center seatbelt buckle (on the left-hand side) to unfasten the seatbelt.

1. Insert a key or other hard pointed object into the slot in the connector (buckle) on the right-hand side and push it in, and the connector (tongue) plate will disconnect from the buckle.

1. Insert a key or other hard pointed object into the slot in the connector (buckle) on the right-hand side and push it in, and the connector (tongue) plate will disconnect from the buckle.

2. Allow the retractor to roll up the belt.

2. Allow the retractor to roll up the belt.

You should hold the webbing end and guide it back into the retractor while it is rolling up. Insert the connector (tongue) into the belt holder.

• Do not allow the retractor to roll up the seatbelt too quickly.

• Do not allow the retractor to roll up the seatbelt too quickly.

Otherwise, the metal tongue plates may hit against the trim, resulting in damaged trim.

• Have the seatbelt fully rolled up so that the tongue plates are neatly stored. A hanging tongue plate can swing and hit against the trim during driving, causing damage to the trim.

Test yourself

A quick Subaru Impreza quiz: every answer comes with an explanation and a link to the manual page.