Instruments and controls

Odometer/Trip meter

~1min read

Non-turbo models
Turbo models

1) Trip knob
Non-turbo models

1) Trip knob

This meter displays the odometer and two trip meters when the ignition switch is in the “LOCK”, “Acc” or “ON” position.

If you press the trip knob when the ignition switch is in the “LOCK” position, the odometer/trip meter will light up. It is possible to switch the indications while the odometer/trip meter is lit up. If you do not press the trip knob within 10 seconds of illumination of the odometer/trip meter, the odometer/trip meter will turn off.

The display can be switched as shown in the following illustration by pressing the trip knob.

*1: STI only

*1: STI only
*2: , and or or, and cannot be displayed when the ignition switch is in the “ON” position. or *3: Turbo models except STI cannot be displayed when the ignition switch is in the “ON” position.
*3: Turbo models except STI

Test yourself

A quick Subaru Impreza quiz: every answer comes with an explanation and a link to the manual page.