Subaru Impreza Quiz
Instruments and controls

Compass zone adjustment

In this manual: Instruments and controls
Foreword — 1Warranties — 5How to use this Owner’s Manual — 5Vehicle symbols — 1Safety precautions when driving — 14Illustrated index — 7Function settings — 1Seat, seatbelt and SRS airbags — 75Keys and doors — 66Instruments and controls — 121Climate control — 42Audio — 168Interior equipment — 29Starting and operating — 111Driving tips — 31In case of emergency — 21Appearance care — 16Maintenance and service — 109Specifications — 21Consumer information and Reporting safety defects — 31
~1min read

1. The zone setting is factory preset to Zone 8. Refer to the “Compass calibration zones” map shown above to verify that the compass zone setting is correct for your geographical location.
Compass calibration zones

1. The zone setting is factory preset to Zone 8. Refer to the “Compass calibration zones” map shown above to verify that the compass zone setting is correct for your geographical location.

2. Press and hold the right button for 3 seconds then release, and the word “ZONE” will briefly appear and then the zone number will be displayed.

3. Press the right-hand button repeatedly to cycle the display through all possible zone settings. Stop cycling when the correct zone setting for your location is displayed.

4. Releasing the button for 3 seconds will exit the zone setting mode.

Test yourself

A quick Subaru Impreza quiz: every answer comes with an explanation and a link to the manual page.