Subaru Legacy Quiz
Instruments and controls

START

In this manual: Instruments and controls
About vehicle — 35Seat, seatbelt and SRS airbags — 72Keys and doors — 60Instruments and controls — 106Climate control — 43Audio — 92Interior equipment — 38Starting and operating — 85Driving tips — 47In case of emergency — 20Appearance care — 16Maintenance and service — 105Specifications — 16Consumer information and Reporting safety defects — 23
~1min read

CAUTION

Do not turn the ignition switch to the “START” position while the engine is running.

The engine is started in this position. The starter cranks the engine to start it. When the key is released (after the engine has started), the key automatically returns to the “ON” position.

If the engine does not start with your registered key, pull out the key once (at this time, the security indicator light will blink), wait for at least 10 seconds, reinsert the key in the ignition switch and then try to start the engine again.

NOTE

The engine may not start in the following cases:

● The key grip is touching another key or a metallic key holder.

● The key grip is touching another key or a metallic key holder.

● The key is near another key that contains an immobilizer transponder.

● The key is near another key that contains an immobilizer transponder.

● The key is near or touching another transmitter.

Test yourself

A quick Subaru Legacy quiz: every answer comes with an explanation and a link to the manual page.