Subaru Legacy Quiz
Instruments and controls

Compass zone adjustment

In this manual: Instruments and controls
About vehicle — 35Seat, seatbelt and SRS airbags — 72Keys and doors — 60Instruments and controls — 106Climate control — 43Audio — 92Interior equipment — 38Starting and operating — 85Driving tips — 47In case of emergency — 20Appearance care — 16Maintenance and service — 105Specifications — 16Consumer information and Reporting safety defects — 23
~1min read
Compass calibration zones

Compass calibration zones

1. Refer to the “Compass calibration zones” map shown above to verify that the compass zone setting is correct for your geographical location. 2. Press and hold the switch for 6 seconds until the zone selection comes up (a number will be displayed in the mirror compass window). 3. Press the switch repeatedly until the correct zone setting for your location is displayed.

4. Releasing the button for 10 seconds will exit the zone setting mode.

Test yourself

A quick Subaru Legacy quiz: every answer comes with an explanation and a link to the manual page.