Subaru Legacy Quiz
Audio

Scan tuning (SCAN)

In this manual: Audio
About vehicle — 35Seat, seatbelt and SRS airbags — 72Keys and doors — 60Instruments and controls — 106Climate control — 43Audio — 92Interior equipment — 38Starting and operating — 85Driving tips — 47In case of emergency — 20Appearance care — 16Maintenance and service — 105Specifications — 16Consumer information and Reporting safety defects — 23
~1min read
If you press the “SCAN” button, the radio will switch to the scan mode. In this

If you press the “SCAN” button, the radio will switch to the scan mode. In this mode, the radio scans through the radio band until a station is found. The radio will stop at the station for 5 seconds while displaying the frequency, after which scanning will continue until the entire band has been scanned.

Press the “SCAN” button again to cancel the SCAN mode. If you press the “SCAN” button while the radio is stopped at a station, the radio stays stopped at that station. If you press the button while the radio is scanning, the radio stops at the next receivable station.

Automatic tuning may not function properly if the station reception is weakened by distance from the station or proximity to tall buildings and hills.

Test yourself

A quick Subaru Legacy quiz: every answer comes with an explanation and a link to the manual page.