Subaru Legacy Quiz
Audio

Preset buttons

In this manual: Audio
About vehicle — 35Seat, seatbelt and SRS airbags — 72Keys and doors — 60Instruments and controls — 106Climate control — 43Audio — 92Interior equipment — 38Starting and operating — 85Driving tips — 47In case of emergency — 20Appearance care — 16Maintenance and service — 105Specifications — 16Consumer information and Reporting safety defects — 23
~1min read

How to preset channels

1. Press the “SAT” button to select SAT1, SAT2 and SAT3 reception. 2. Select the desired channel.

3. Press one of the preset buttons for more than 1.5 seconds to store the channel. If the button is pressed for less than 1.5 seconds, the preceding selection will remain in memory.

NOTE

If the connection between the radio and battery is broken for any reason such as vehicle maintenance or radio removal, all channels stored in the preset buttons are cleared. If this occurs, it is necessary to reset the preset channels.

Test yourself

A quick Subaru Legacy quiz: every answer comes with an explanation and a link to the manual page.