Subaru Legacy Quiz
Maintenance and service

Pulling off the fender lining

In this manual: Maintenance and service
About vehicle — 35Seat, seatbelt and SRS airbags — 72Keys and doors — 60Instruments and controls — 106Climate control — 43Audio — 92Interior equipment — 38Starting and operating — 85Driving tips — 47In case of emergency — 20Appearance care — 16Maintenance and service — 105Specifications — 16Consumer information and Reporting safety defects — 23
~1min read

It is necessary to pull off the fender lining when replacing some bulbs.

1. Start the engine and turn the steering wheel fully in the opposite direction of the bulb to be replaced.

2. Stop the engine.

3. Remove the clip from the fender lining. Refer to “Type B clips” F11-5.

3. Remove the clip from the fender lining. Refer to “Type B clips” F11-5.

4. Pull off the fender lining.

4. Pull off the fender lining.

Test yourself

A quick Subaru Legacy quiz: every answer comes with an explanation and a link to the manual page.