Subaru Legacy Quiz
Maintenance and service

Low beam light bulbs

In this manual: Maintenance and service
About vehicle — 35Seat, seatbelt and SRS airbags — 72Keys and doors — 60Instruments and controls — 106Climate control — 43Audio — 92Interior equipment — 38Starting and operating — 85Driving tips — 47In case of emergency — 20Appearance care — 16Maintenance and service — 105Specifications — 16Consumer information and Reporting safety defects — 23
~1min read

1. Pull off the fender lining. For details, refer to “Pulling off the fender lining” F11- 7.

2. Remove the bulb cover, by turning it counterclockwise.

2. Remove the bulb cover, by turning it counterclockwise.

3. Disconnect the electrical connector.

3. Disconnect the electrical connector.

4. Remove the retainer spring.

4. Remove the retainer spring.

5. Replace the bulb, then set the retainer spring securely.

5. Replace the bulb, then set the retainer spring securely.

6. Reconnect the electrical connector.

7. Install the bulb cover.

8. After replacing the bulb, reattach the fender lining.

8. After replacing the bulb, reattach the fender lining.

Test yourself

A quick Subaru Legacy quiz: every answer comes with an explanation and a link to the manual page.