Drive mode selector description

Engine power characteristics can be changed in 3 modes by operating the drive mode selector to meet various riding conditions and rider’s preference.

Drive mode is preset at a-mode when the ignition switch and engine stop switch are turned on. Follow the procedure below to operate drive mode selector.

1. 1
   Turn on the ignition switch and engine stop switch.
2. 2
   Push the drive mode selector up or down
   for 1 second until the drive
   mode indicator shows a.
3. 3
   Push the drive mode selector to change drive mode.

   Pushing the up switch can
   change from a to c to b to a. Pushing the down
   switch can change from a to b to c to a. The drive mode indicator indicates actual drive mode.

• operating the drive mode selector while riding with the throttle opened will change the engine speed because of engine power characteristics change.
• Drive mode indicator blinks when drive mode change operation is failed.
• Turning off the ignition switch or engine stop switch will return the drive mode to amode.

Start the engine and reset the drive mode.

A-mode provides sharp throttle response at all throttle opening range to obtain maximum engine power.

B-mode provides softer throttle response than a-mode up to middle throttle opening range.

C-mode provides soft throttle response at all throttle opening range by reducing engine power.