Suzuki GSX-R 1000 Quiz
Precautions

Using the testers

In this manual: Precautions
Foreword — 1Precautions — 15General information — 44Engine — 269Suspension — 52Driveline / axle — 13Brake — 51Transmission / transaxle — 34Steering — 15Body and accessories — 68
~1min read
  • Incorrectly connecting the (+) and (.) Probes may cause the inside of the tester to be burned.
  • If the voltage and current are not known, make measurements using the highest range.
  • When measuring the resistance with the multi-circuit tester (1), ∞ will be shown as 10.00 Mƒ¶ and ƒg1ƒh flashes in the display.
  • Check that no voltage is applied before making the measurement. If voltage is applied the tester may be damaged.
  • After using the tester, turn the power off.
Special tool : 09900–25008
(multi circuit tester set)
Suzuki GSX-R. Using the testers

Note

  • when connecting the multi-circuit tester, use the needle pointed probe to the back side of the lead wire coupler and connect the probes of tester to them.
  • Use the needle pointed probe to prevent the rubber of the water proof coupler from damage.
  • When using the multi-circuit tester, do not strongly touch the terminal of the ecm coupler with a needle pointed tester probe to prevent terminal damage.

Special tool (a):
09900–25009 (needle-point probe set)
Suzuki GSX-R. Using the testers

Test yourself

A quick Suzuki GSX-R 1000 quiz: every answer comes with an explanation and a link to the manual page.