Suzuki GSX-R 1000 Quiz
Storage procedure and motorcycle cleaning

Washing the motorcycle

In this manual: Storage procedure and motorcycle cleaning
Foreword — 1The sport of motorcycling — 12Fuel, engine oil and coolant recommendation — 4Controls, equipment and adjustments — 22Break-in and inspection before riding — 3Riding tips — 7Accessory use and motorcycle loading — 6Inspection and maintenance — 36Troubleshooting — 3Storage procedure and motorcycle cleaning — 8Consumer information — 6Specifications — 1
5steps
~30min
2/5difficulty
Done 0 of 5

When washing the motorcycle, follow the instructions below:

  1. Remove dirt and mud from the motorcycle with running water.

    You may use a soft sponge or brush. Do not use hard materials which can scratch the paint.

  2. Wash the entire motorcycle with a mild detergent or car wash soap using a sponge or soft cloth. The sponge or cloth should be frequently soaked in the soap solution.
Caution Radiator fins can be damaged by spraying high pressure water on them.

Do not spray high pressure water on the radiator fins.

Note

: avoid spraying or allowing water to flow over the following places:
  • ignition switch
  • spark plugs
  • fuel tank cap
  • fuel injection system
  • brake master cylinders
  1. Once the dirt has been completely removed, rinse off the detergent with running water.
  2. After rinsing, wipe off the motorcycle with a wet chamois or cloth and allow it to dry in the shade.
  3. Check carefully for damage to painted surfaces. If there is any damage, obtain "touch-up" paint and ''touch-up" the damage.

Test yourself

A quick Suzuki GSX-R 1000 quiz: every answer comes with an explanation and a link to the manual page.