Checking and replacing fuses

If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as necessary. Vehicles without a smart key
system Turn the engine switch off. Vehicles with a smart key system

Turn the “ENGINE START STOP” switch off.

Open the fuse box cover.

Engine compartment

Push the tab in and lift the lid off.

Driver’s side instrument panel

Remove the lid.

After a system failure, see
“Fuse layout and amperage ratings” for details about which fuse to check.

Remove the fuse.

Only type A fuse can be removed using the pull-out tool.

Check if the fuse is blown.

Type A

1. Normal fuse
2. Blown fuse

Replace the blown fuse with a new fuse of an appropriate amperage rating. The amperage rating can be found on the fuse box lid.

Type B

1. Normal fuse

2. Blown fuse

Replace the blown fuse with a new fuse of an appropriate amperage rating. The amperage rating can be found on the fuse box lid.

Type C

1. Normal fuse

2. Blown fuse

Replace the blown fuse with a new fuse of an appropriate amperage rating. The amperage rating can be found on the fuse box lid.

Type D

1. Normal fuse
2. Blown fuse

Replace the blown fuse with a new fuse of an appropriate amperage rating. The amperage rating can be found on the fuse box lid.

Type E

1. Normal fuse
2. Blown fuse

Replace the blown fuse with a new fuse of an appropriate amperage rating. The amperage rating can be found on the fuse box lid.

Type F

1. Normal fuse
2. Blown fuse

Contact your Toyota dealer.

Fuse layout and amperage ratings Engine compartment

Driver’s side instrument panel

After a fuse is replaced • If the lights do not turn on even after the fuse has been replaced, a bulb may need replacement. • If the replaced fuse blows again, have the vehicle inspected by your Toyota dealer. If there is an overload in a circuit

The fuses are designed to blow, protecting the wiring harness from damage.

CAUTION To prevent system breakdowns and vehicle fire Observe the following precautions. Failure to do so may cause damage to the vehicle, and possibly a fire or injury. • Never use a fuse of a higher amperage rating than that indicated, or use any other object in place of a fuse. • Always use a genuine Toyota fuse or equivalent. Never replace a fuse with a wire, even as a temporary fix.

• Do not modify the fuses or fuse boxes.

NOTICE

Before replacing fuses

Have the cause of electrical overload determined and repaired by your Toyota dealer as soon as possible.