Disassembly

DISASSEMBLY PROCEDURE

1. REMOVE NO. 1 ROOF SILENCER PAD (w/o Sliding Roof)

(a) Remove the No. 1 roof silencer pad.

2. REMOVE NO. 2 ROOF SILENCER PAD

(a) w/o Sliding Roof:

Remove the 2 No. 2 roof silencer pads.

(b) w/ Sliding Roof: Remove the No. 2 roof silencer pad.

3. REMOVE NO. 3 ROOF SILENCER PAD (w/o Sliding Roof)

(a) Remove the No. 3 roof silencer pad.

4. REMOVE NO. 4 ROOF SILENCER PAD

(a) w/o Sliding Roof:

Remove the No. 4 roof silencer pad.

(b) w/ Sliding Roof: Remove the No. 4 roof silencer pad.

5. REMOVE VANITY LIGHT ASSEMBLY

HINT:

Use the same procedure for the other vanity light.

(a) Detach the 2 claws labeled A and separate the bulb holder from the vanity light as shown in the illustration.

(b) Detach the claw labeled B and remove the vanity light.

Text in Illustration

*1	Claw A
*2	Claw B
*3	Bulb Holder

6. REMOVE NO. 1 ROOF WIRE

(a) Turn the visor connectors approximately 90° clockwise and remove them from the roof headlining.

(b) Detach each clamp and remove the tape and No. 1 roof wire.

Text in Illustration

*A	w/o Sliding Roof	*B	w/ Sliding Roof
*C	w/ EC Mirror	-	-
*1	Visor Connector	*2	Marking Tape

7. REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY

(a) w/o Sliding Roof:

Remove the No. 2 antenna cord sub-assembly (See page ).

(b) w/ Sliding Roof:

Remove the No. 2 antenna cord sub-assembly (See page ).