Toyota 4Runner Quiz
Drivetrain

Inspection

In this manual: Drivetrain
General — 25Audio / Visual / Telematics — 283Brake — 187Drivetrain — 204Power Source / Network — 79Steering — 76Suspension — 130Vehicle Exterior — 391Vehicle Interior — 693
~1min read
INSPECTION PROCEDURE

1. INSPECT FRONT PROPELLER SHAFT ASSEMBLY

(a) Using a dial indicator, check the propeller shaft runout.

Maximum runout:

0.3 mm (0.0118 in.)

If the shaft runout is more than the maximum, replace the propeller shaft.

2. INSPECT FRONT PROPELLER SHAFT UNIVERSAL JOINT SPIDER BEARING

(a) Check the spider bearings for wear or damage.

If necessary, replace the spider bearing.

(b) Check the spider bearing axial play by turning the yoke while holding the shaft tightly.

Maximum bearing axial play:

0.0 mm (0 in.)

If the axial play is more than the maximum, replace the spider bearing.

Test yourself

A quick Toyota 4Runner quiz: every answer comes with an explanation and a link to the manual page.