Installation

1. INSTALL STEERING WHEEL ASSEMBLY

(a) Align the matchmarks on the steering wheel assembly and steering main shaft assembly.

(b) Install the steering wheel assembly set nut.

Torque:

50 N·m {510 kgf·cm, 37 ft·lbf}

2. INSTALL CRUISE CONTROL MAIN SWITCH

3. INSTALL STEERING PAD SWITCH ASSEMBLY

(a) Attach the 2 claws and 4 guides to install the steering pad switch assembly.

(b) Install the 4 screws.

Torque:

2,4 N·m {24 kgf·cm, 21 in·lbf}

(c) Connect the connector.

4. INSTALL STEERING PAD

5. INSTALL NO. 2 STEERING WHEEL LOWER COVER

6. INSTALL NO. 3 STEERING WHEEL LOWER COVER

7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page ).

8. CHECK SRS WARNING LIGHT

(See page )