Installation

HINT:

• Use the same procedure for the RH and LH sides.
• The procedure listed below is for the LH side.

1. INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY LH (w/ Rear No. 2 Seat)

(a) Install the curtain shield airbag with the new 14 bolts.

Torque:

9,8 N·m {100 kgf·cm, 87 in·lbf}

NOTICE:

Do not twist the curtain shield airbag when installing it.

(b) Connect the connector. NOTICE: When handling the airbag connector, take care not to damage the airbag wire harness.

2. INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY LH (w/o Rear No. 2 Seat)

(a) Install the curtain shield airbag with the new 11 bolts.

Torque:

9,8 N·m {100 kgf·cm, 87 in·lbf}

NOTICE:

Do not twist the curtain shield airbag when installing it.

(b) Connect the connector. NOTICE: When handling the airbag connector, take care not to damage the airbag wire harness.

3. INSTALL ROOF HEADLINING ASSEMBLY

(a) Install the roof headlining (See page ).