When driving

Multi-terrain Select

~1min read
The Multi-terrain Select system has 4 terrain modes. When a terrain mode is selected in accordance with terrain conditions, engine power and active traction control system is controlled to enhance off-road drivability. Additionally, guidance messages such as transfer mode selection advice are displayed on the accessory meter to assist the driver in operating the vehicle.

1. “ON/OFF” switch 2. Mode selector dial
3. Mode indicators
4. Multi-terrain Select indicator 5. Accessory meter

Multi-terrain Select modes


The following table shows some typical terrains and the recommended Multi-terrain Select modes.

Multi-terrain Select can be activated when • Vehicle speed is approximately 12 km/h or less. • MUD & SAND: The front-wheel drive control lever or switch is in L4 or H4. LOOSE ROCK, MOGUL and ROCK: The front-wheel drive control lever or switch is in L4.


• Crawl Control is not operating.

Test yourself

A quick Toyota 4Runner quiz: every answer comes with an explanation and a link to the manual page.