Removal

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page ).

2. REMOVE DOOR SCUFF PLATE ASSEMBLY RH

HINT:

Use the same procedure as for the LH side (See page ).

3. REMOVE COWL SIDE TRIM BOARD RH

4. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH

5. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

6. REMOVE FRONT NO. 2 CONSOLE BOX INSERT

7. REMOVE LOWER INSTRUMENT COVER LH

8. REMOVE LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY

(a) Remove the 3 bolts.

(b) Detach the 8 claws and remove the instrument panel airbag.

(c) Disconnect the connector.

NOTICE:

When handling the airbag connector, take care not to damage the airbag wire harness.