Toyota 4Runner Quiz
Vehicle Interior

Removal

In this manual: Vehicle Interior
General — 25Audio / Visual / Telematics — 283Brake — 187Drivetrain — 204Power Source / Network — 79Steering — 76Suspension — 130Vehicle Exterior — 391Vehicle Interior — 693
~1min read
REMOVAL CAUTION / NOTICE / HINT

HINT:

  • Use the same procedure for the RH and LH sides.
  • The procedure listed below is for the LH side.
PROCEDURE

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page ).


2. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH LH


3. REMOVE NO. 2 DOOR INSIDE HANDLE BEZEL LH


4. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH


5. REMOVE FRONT DOOR GLASS WEATHERSTRIP INNER LH


6. REMOVE SIDE AIRBAG SENSOR ASSEMBLY LH

(a) Disconnect the connector.

(b) Remove the bolt and side airbag sensor.

Test yourself

A quick Toyota 4Runner quiz: every answer comes with an explanation and a link to the manual page.