Removal

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page ).

2. REMOVE REAR CONSOLE BOX ASSEMBLY

(a) Remove the rear console box assembly (See page ).

3. REMOVE NO. 1 PARKING BRAKE CABLE ASSEMBLY

(a) Remove the No. 1 parking brake cable assembly (See page ).

4. REMOVE FUEL TANK SUB-ASSEMBLY

(a) Remove the fuel tank sub-assembly (See page ).

5. REMOVE NO. 2 PARKING BRAKE SHOE ASSEMBLY WITH PARKING BRAKE SHOE LEVER

HINT:

Refer to the procedures up to "Remove No. 2 Parking Brake Shoe Assembly with Parking Brake Shoe Lever" (See page ).

6. REMOVE NO. 2 PARKING BRAKE CABLE ASSEMBLY

(a) Remove the 2 bolts and disconnect the No. 2 parking brake cable assembly from the backing plate.

(b) Remove the No. 1 parking brake cable heat insulator.

(c) Remove the 5 bolts from the No. 2 parking brake cable assembly.

(d) Remove the clip and disconnect the No. 2 parking brake cable assembly from the parking brake equalizer. Text in Illustration *1 Clip

(e) Pinch the claws of the No. 2 parking brake cable and push the cable outside of the vehicle slightly.

7. REMOVE NO. 3 PARKING BRAKE CABLE ASSEMBLY

(a) Remove the 2 bolts and disconnect the No. 3 parking brake cable assembly from the backing plate.

(b) Remove the 4 bolts from the No. 3 parking brake cable assembly.

(c) Remove the clip and disconnect the parking brake cable assembly No. 3 from the parking brake equalizer. Text in Illustration *1 Clip

(d) Pinch the claws of the No. 3 parking brake cable and push the cable outside of the vehicle slightly.